Description
3.15 User-definable display of measured variables
SENTRON PAC4200
50 Manual, 09/2008, A5E02316180B-01
3.15 User-definable display of measured variables
Up to four measurements can be individually configured for SENTRON PAC4200. Four
presentational formats can be selected:
● Digital display of two measured variables
● Digital display of four measured variables
● Bar diagram for measured variables
● Bar diagram for three measured variables
Digital display
The instantaneous value, the designation, and the unit are shown for each measured
variable.
Figure 3-20 Example of a definable display (digital display)
Graphical display
The instantaneous value, designation, unit, and parameterizable value range are shown for
each measured variable. The instantaneous value is represented as a bar diagram and
digital information.
Figure 3-21 Example of a freely definable display (bar diagram)
An outward pointing arrow in the bar means that the instantaneous value displayed is
outside the parameterized range.
Configuring
The measured value displays can be configured with the SENTRON powerconfig software.
To Next Page
Loading...
