Description
3.14 Password protection
SENTRON PAC4200
Manual, 09/2008, A5E02316180B-01
49
3.14 Password protection
SENTRON PAC4200 can be protected with a password.
Scope
The password protection is activated for write accesses via the user interface or via the
integrated Ethernet interface. You can find more information on access protection in
conjunction with optional communication modules in the documentation for these modules.
MODBUS: MODBUS function codes can be used for write accesses if the password is active
as well as to manage the password.
The MODBUS function codes for write accesses to SENTRON PAC4200 when password
protection is active are not described in this document. The relevant documentation can be
requested from Technical Support.
Format
A four-digit, numeric password is used.
Default
The default password is: 0000
See also
Password management (Page 141)
Technical support (Page 12)
Advanced (Page 133)
To Next Page
Loading...
