Siemens SENTRON PAC4200 - Display

Parameterizing
9.2 Parameterizing the operator interface
SENTRON PAC4200
132 Manual, 09/2008, A5E02316180B-01
COMMUNICATION
MAC-ADDR: MAC address. Read only.
IP-ADDR.: IP address.
SUBNET: Subnet mask.
GATEWAY: Gateway address of a computer that can set up a connection
from the network defined in the field "SUBNET" to another
network (e.g. a router).
PROTOCOL: SEAbus TCP or MODBUS TCP
9.2.9 Display
Device settings for the SENTRON PAC4200 display.
Call: "SETTINGS > DISPLAY".
Figure 9-9 "DISPLAY" device setting
DISPLAY
CONTRAST Contrast of the LC display.
Range: 0 to 10.
Default: 5
BACKLIGHT LEVEL Intensity of the backlighting of the LC display.
The value "0" switches the backlighting off.
Range: 0 to 3.
Default value: 3
BACKLIGHT DIMMED Intensity of the backlighting of the LC display. Set by the
device after the display time until dimmed expires. See
"TIME UNTIL DIMMED" field
The value "0" switches the backlighting off.
Range: 0 to 3.
Default value: 1
TIME UNTIL DIMMED Time after which the device switches the backlighting
from "BACKLIGHT LEVEL" to "BACKLIGHT DIMMED.
Range: 0 to 99 min.
Default: 3 min.