Siemens SENTRON PAC4200 - Connecting the cables to the terminals

Connecting
6.3 Connecting the cables to the terminals
SENTRON PAC4200
74 Manual, 09/2008, A5E02316180B-01
6.3 Connecting the cables to the terminals
Connecting cables to the screw terminal
Tool: PZ2 cal. screwdriver ISO 6789


Figure 6-7 Connecting cables to the screw terminal
Connecting the cables to the ring lug terminals:
Note
The SENTRON PAC4200 with ring lug terminal is intended for:
• use in NAFTA / USA
• Regions in which open terminals are permitted.
WARNING
Improper connection may result in death, serious injury, or property damage.
Ring lug terminals are intended exclusively for connecting ring lugs. Please ensure that the
ring lugs are properly attached to the ends of the cables.
Tool: PZ2 cal. screwdriver ISO 6789