Siemens SENTRON PAC5200 - Page 204

8 Operation at Use of the Display
8.4 Parameterization
204 SENTRON PAC5100/5200, 7KM5212/5412, Device Manual
E50417-H1040-C568-A1, Edition 03.2015
Submenu Display Number 32.4: Date/Time
Figure 8-21 Submenu Display Number 32.4, Date/Time
Table 8-4 Date/ Time Settings
Parameter Default Setting Setting Range
Time source internal internal
Ethernet NTP
Fieldbus
Date Current date setting according to format
Format YYYY-MM-DD24 YYYY-MM-DD24
YYYY-MM-DD12
DD.MM.YYYY24
DD.MM.YYYY12
MM/DD/YY24
MM/DD/YY12
Time Current time setting according to format
Time zone 00:00 -12 to +13 (hours)
(in increments of 0.5 h)
32.4
Date/Time
32.4
Time source
ENTER
32.4
Date
EDIT
+
-
EDIT
32.4
Format
EDIT


Select. parameters acc .
to following table
OK
32.4
Time
EDIT
32.4
Time zone
EDIT
ESC
