Siemens SIMATIC HMI Mobile Panel 277 RO - Page 113

Using RemoteOperate Client
7.2 Connecting a client
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
113
The RemoteOperate toolbar
If you press the touch screen for more than five seconds (time can be configured in the
roServer.ini), the RemoteOperate toolbar is displayed in the foreground on your screen.
Alternatively, if you have operator authorization, you can left-click the traffic light to open the
RemoteOperate toolbar.
Note
The length of time you need to press the touch screen before the RemoteOperate
toolbar is
displayed is defined in the "roServer.ini" file.
The special functions of the RemoteOperate toolbar are shown in the table below:
Buttons
Functions
Executes a right-click on the server.
Proceed as follows:
1. Select a screen object which has a right-click function.
2. Touch the "Right-click" button.
3. Execute the desired function.
Opens the screen keyboard (only with the Windows CE operating system).
Operates the Windows button on the server.
Executes the <Ctrl+Alt+Del> shortcut on the server, e.g., to log onto the server.
Terminates the connection to the server.
Closes the RemoteOperate toolbar.