Configuring the operating system
6.3 Changing settings for operation
Mobile Panel 277 RO
82 Operating Instructions, 10/2015, A5E36824256-AA
Proceed as follows:
1. Double-click the pattern twice.
After one double-click the pattern is shown in inverse colors.
2. Double-click the symbol twice.
If the double-click is valid, the icon is displayed as follows:
3. If the icon remains unchanged, double-click on the pattern again.
4. Confirm your entries.
The dialog closes.
The double-click adjustment is completed.
Calibrating the touch screen
Introduction
Depending on the mounting position and viewing angle, it is possible that parallax may occur
when operating the touch screen. In order to prevent any operating errors as a result,
calibrate the touch screen again in the startup phase or during runtime.
You have opened the "OP Properties" dialog box, "Touch" tab, by touching the "OP"
icon.
Button for calibrating the touch screen
To Next Page
Loading...
