Configuring the operating system
6.3 Changing settings for operation
Mobile Panel 277 RO
80 Operating Instructions, 10/2015, A5E36824256-AA
Proceed as follows:
1. Press the "Open Input Panel" button to display the screen keyboard.
2. By pressing the button, you can switch between the numerical and alphanumerical
screen keyboard.
3. Set the position of the screen keyboard by moving the screen keyboard on the screen.
4. Store the settings by pressing the "Save" button.
5. Close the screen keyboard by pressing the "Close Input Panel" button.
6. Close the dialog.
The screen keyboard settings have been modified.
Setting the character repeat rate of the screen keyboard
Introduction
You can set the character repeat for the screen keyboard in the Control Panel.
You have opened the "Keyboard Properties" dialog with the "Keyboard" icon.
Check box for activating the character repeat
Slider control and buttons for the delay time before character repeat
Slider control and buttons for the rate of the character repeat
To Next Page
Loading...
