Siemens SIMATIC HMI Mobile Panel 277 RO - Operating the Control Panel

Configuring the operating system
6.2 Control Panel
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
77
Icon
Functions
Tab / entry
Changing the PROFINET IO setting –
Changing regional settings
Not relevant for the Mobile Panel 277 RO.
–
Changing S7 transfer settings
Not relevant for the Mobile Panel 277 RO.
–
Setting the screen saver
Reducing the backlighting
–
Displaying the system information
"General"
Displaying memory information "Memory"
Setting the device name of the HMI device
"Device Name"
Configuring the data channel "Channel"
Setting the delay time "Directories"
Changing e-mail settings
Not relevant for the Mobile Panel 277 RO.
–
6.2.3
Operating the Control Panel
Introduction
The Control Panel is operated with the HMI device touch screen.
Procedure
Proceed as follows to change settings in the Control Panel:
1. Exit the RemoteOperate Client application by pressing .
The Loader appears.
2. Open the Control Panel by means of the "Control Panel" button.
3. To open the required dialog, double-click its symbol.
4. Change as required by touching the tab.
5. Now make the necessary changes.
Touch the respective input object to make entries.
– Use the screen keyboard of the HMI device to enter the new values in the text boxes.
– Touch a button to operate it.
– Touch the selection box to open a drop down list box. Touch the required entry from
the drop down list box.
– Touch the check box to activate or deactivate a check box.
– Touch a radio button to select it.