Siemens SIMATIC HMI Mobile Panel 277 RO - Configuring Network Operation; Setting the Device Name of the HMI Device

Configuring the operating system
6.8 Configuring network operation
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
99
6.8
Configuring network operation
6.8.1
Setting the device name of the HMI device
Introduction
The HMI device uses the device name to identify itself in the network.
Requirements
You have opened the "System Properties" dialog with the "System" icon.
①
Device name of the HMI device
②
Description for the HMI device (optional)
Note
Change the device name for the HMI device in the "Device name" text box to activate
the
network functions.
Procedure
Proceed as follows:
1. Enter the device name for the HMI device in the "Device name" text box.
2. If necessary, enter a description for the HMI device in the "Device description" text box.
3. Confirm your entries.
The dialog closes.
Result
The device name for the HMI device is now set.