Siemens SIMATIC HMI Mobile Panel 277 RO - Accessories; Connecting Cable

Overview
1.3 Accessories
Mobile Panel 277 RO
12 Operating Instructions, 10/2015, A5E36824256-AA
1.3
Accessories
1.3.1
Connecting cable
The Mobile Panel 277 RO is compatible with the connecting cable PN:
①
Metallic push-pull circular connector
②
Strain relief and antikink device for the connecting cable
③
RJ45 connector
④
Plug connector, 12-pin
Connect the connecting cable to the Mobile Panel 277 RO so that it is not detachable. The
connection to the connection box PN Plus is achieved by means of a detachable connector.
The connecting cable PN is an industrial cable and is therefore resistant to many solvents
and lubricants. The flexural strength of the connecting cable is geared to the actual usage
conditions.
Note
Degree of protection
When inserted, the circular connector guarantees IP65 degree of protection..
Ordering information
The connecting cable PN is not included with the HMI device. The connecting cable PN is
available in various lengths under the following article numbers:
Length of the connecting cable
Article number
5 m
6XV1440-4BH50
10 m
6XV1440-4BN10
25 m
6XV1440-4BN25