Planning application
3.3 Preparing for mounting
Mobile Panel 277 RO
36 Operating Instructions, 10/2015, A5E36824256-AA
Preparing for mounting
Choose the mounting location for the wall-mounting bracket
Observe the following points when selecting the mounting location:
● Position the wall-mounting bracket so that the display of the hooked-in HMI device is not
exposed to direct sunlight.
● Position the wall-mounting bracket so that the HMI device can be ergonomically inserted
by the user. Choose a suitable mounting height.
The following clearances are required around the wall-mounting bracket:
To Next Page
Loading...
