Siemens SIMATIC HMI Mobile Panel 277 RO - 7.6 Example: Assigning operator authorization

Using RemoteOperate Client
7.6 Example: Assigning operator authorization
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
117
The loader contains the following four buttons:
● Use the "Transfer" button to transfer data from a PC to the HMI device.
● Use the "Start" button to open the server selection list.
● Use the "Control Panel" button to configure the operating system.
● Use the "Taskbar" button to activate the taskbar when the Windows CE Start menu is
open.
7.6
Example: Assigning operator authorization
Introduction
This chapter describes how to assign operator authorization on the server to different clients
in succession.
The description uses an example configuration with one server and three HMI devices
connected to the server as clients via Ethernet.