Siemens SIMATIC HMI Mobile Panel 277 RO - Page 116

Using RemoteOperate Client
7.5 Closing the RemoteOperate Client
Mobile Panel 277 RO
116 Operating Instructions, 10/2015, A5E36824256-AA
2. Close the connection to the server using the button.
The server selection list is displayed:
Close the RemoteOperate Client software using the button in the upper right corner of
the window.
Note
Password protection
If your HMI device is password protected, you are prompted for the password at this poin
t.
To close RemoteOperate Client software, enter the password for the HMI device.
Result
You have closed the RemoteOperate Client software. The loader is displayed: