Siemens SIMATIC HMI Mobile Panel 277 RO - Reference

Configuring the operating system
6.2 Control Panel
Mobile Panel 277 RO
76 Operating Instructions, 10/2015, A5E36824256-AA
6.2.2
Reference
Overview of functions
The following table shows the settings in the Control Panel.
Some settings are only effective when a project is running on the HMI device. These settings
are not relevant for the Mobile Panel 277 RO and are marked accordingly in the table below.
Icon
Functions
Tab / entry
Backup and restore with the memory card –
Importing, displaying and deleting certificates
Not relevant for the Mobile Panel 277 RO.
"Stores"
Setting the date and time "Date/Time"
Configuring the screen keyboard –
Changing internet settings
Not relevant for the Mobile Panel 277 RO.
–
Setting the character repeat for the screen keyboard "Repeat"
Setting the double-click "Double-Click"
Parameterizing the LAN connection
"LAN90001"
Setting the IP address "'SMC LAN91C111 Ethernet' Settings" "IP Address"
Setting the name server
"'SMC LAN91C111 Ethernet' Settings"
"Name Servers"
Changing the logon data "Identification"
Backup registry information "Persistent Storage"
Changing monitor settings
"Display"
Displaying information about the HMI device
"Device"
Restarting the HMI device
"Device"
Calibrating the touch screen
"Touch"
Display rechargeable battery charge level
"Accu"
Activate memory management
Not relevant for the Mobile Panel 277 RO.
"Memory Monitoring"
Changing password protection "Password Settings"
Changing the printer properties
Not relevant for the Mobile Panel 277 RO.
–