Mounting and connecting
4.4 Connecting the connection box
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA
49
Connecting the connecting cable
Introduction
The connecting cable can be connected to the connection box with the help of a connector
(metallic push-pull circular connector). The plug connector is coded anti-rotationally using a
slot and key system.
If you pull on the cable or the clamping nut, the taper sleeve moves under the interlocking
claws and presses them into the interlocking slot. The plug connection cannot be separated.
If you pull on the outer sleeve, the interlocking claws slide out of the interlocking slot. The
plug connection can be separated.
To Next Page
Loading...
