Siemens SIMATIC HMI Mobile Panel 277 RO - 7.2 Connecting a client

Using RemoteOperate Client
7.2 Connecting a client
Mobile Panel 277 RO
110 Operating Instructions, 10/2015, A5E36824256-AA
7.2
Connecting a client
Requirement
● You have switched on the HMI device.
Note
If you have switched on the HMI device for the first time, the server selection list is empty.
Create a new server selection list.
Procedure
1. Select the name of the server to which you want to connect.
DANGER
Full access to the server
Depending on your access authorization, when you connect to the server, you have full
access.
Improper use of the server by unauthorized personnel may cause the server to
malfunction. Malfunctions can result in death or serious injury.
You should assign passwords to the HMI devices. Develop an operator authorization
plan. This will enable you to ensure that only authorized personnel are given full access
to the server.