Safety instructions and general notes
2.1 General safety instructions
Mobile Panel 277 RO
20 Operating Instructions, 10/2015, A5E36824256-AA
Operational reliability of the HMI device
After a hard impact to the HMI device, check the safety-relevant features for functional
capability, for example in the event that the HMI device is dropped.
Manual actions performed with the HMI device may only occur in conjunction with the
enabling buttons and at reduced velocity.
During operation, note:
• The hazardous location must be visible from the operating position taken by the
personnel.
• Ensure that current operation is only possible by means of the HMI device and not from
any other point on the system.
Potential personal injury or material damage due to non-compliance with machine
regulations
Commissioning of the HMI device is forbidden until it has been absolutely ensured that the
machine in which the HMI device is to be installed complies with Directive 98/37/EC or
Directive 2006/42/EC as of 29 December 2009.
Note
All safety functions of the HMI device have a 2
-channel configuration and can achieve PL d
ISO 13849-1:2008/AC:2009.
Note
Observe immunity to RF radiation
The device has
increased immunity to RF radiation according to the specifications on
electromagnetic compatibility in the technical specifications.
Radiation exposure in excess of the specified immunity limits can impair device functions
and result in malfunctions and th
erefore injuries or damages.
Read the information on immunity to RF radiation in the technical specifications.
To Next Page
Loading...
