Siemens SIMATIC HMI Mobile Panel 277 RO - Page 70

Operator controls and displays
5.3 Holding the mobile panel and fixing it to the wall
Mobile Panel 277 RO
70 Operating Instructions, 10/2015, A5E36824256-AA
Fixing the Mobile Panel in position
A wall-mounting bracket is available for securely fixing the HMI device in position. The
Mobile Panel can be used as a stationary HMI device when it is hooked into the wall -
mounting bracket.
The following picture shows the Mobile Panel in the wall-mounting bracket:
Note
Operability
If the Mobile Panel is not hooked into the wall
-mounting bracket, the operability of the STOP
button can be impaired.