Siemens SIMATIC HMI Mobile Panel 277 RO - Page 74

Configuring the operating system
6.1 Loader
Mobile Panel 277 RO
74 Operating Instructions, 10/2015, A5E36824256-AA
● Press the "Taskbar" button to activate the taskbar with the Windows CE start menu open:
Open Loader
The following options are available to open the Loader:
● The Loader appears briefly after starting the HMI device
● The loader is displayed after exiting the RemoteOperate Client application
Password protection
Note
If the password is
no longer available, you can only cancel password protection by updating
the operating system. All data on the HMI device will be deleted when you update the
operating system.
You can protect the Control Panel and taskbar from unauthorized access. When password
protection is enabled, the message "password protect" is displayed in the loader.
If the password is not entered, only the "Transfer" and "Start" buttons are operable.
This prevents inadvertent operations and increases security for the plant or machine.
See also
Setting the delay time (Page 95)