Configuring the operating system
6.5 Changing HMI device settings
Mobile Panel 277 RO
90 Operating Instructions, 10/2015, A5E36824256-AA
You have opened the "Screensaver" dialog with the "ScreenSaver" icon.
Time interval in minutes until backlighting is reduced
Period of time in minutes before the screen saver is activated
Proceed as follows:
1. Enter the interval in minutes after which the backlighting is to be reduced.
Entering "0" will deactivate the backlighting reduction.
2. Enter the number of minutes before the screen saver is to be activated.
The minimum time is 5 minutes and the maximum time is 71582 minutes.
Entering "0" disables the screen saver.
3. Select either the standard screen saver or an empty screen.
– In order to select the standard screen saver, activate the "Standard" option.
– In order to select an empty screen as screen saver, activate the "Blank Screen"
option.
4. Confirm your entries.
The dialog closes.
The screen saver and the reduced backlighting for the HMI device is set.
To Next Page
Loading...
