Siemens Simatic M7-400

Parameter Sets for Signal Modules
A-3
S7-400, M7-400 Programmable Controllers Module Specifications
A5E00069467-07
Description of the Parameters
The following sections contain all the modifiable parameters for the various module
classes. The parameters of the signal modules are described:
• in the online help of STEP 7.
• in this reference manual
You will find the parameters that can be adjusted for the signal module
concerned in the specific sections for the different signal modules.
Further References
You can find an in-depth description of the principle of assigning parameters to
signal modules in the user program and a description of the SFCs that can be used
for this purpose in the STEP 7 manuals.