Siemens SIMATIC NET SCALANCE W700 User Manual

Configuring with Web Based Management
6.4 "Information" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
142 Configuration Manual, 08/2018, C79000-G8976-C267-13
●
Allocation Method
Shows whether the IPv4 address was assigned statically or dynamically. You configure
the static entries in "System > DHCP > Static Leases".
●
Binding State
Shows the status of the assignment.
– Assigned
The assignment is used.
– Not used
The assignment is not used.
– Probing
The assignment is being checked.
– Unknown
The status of the assignment is unknown.
●
Expire Time
Shows until when the assigned IPv4 address is still valid. Up to this time, the DHCP client
must either request a new IPv4 address or extend the lease time of the assigned IPv4
address.
6.4.12
SNMP
This page displays the created SNMPv3 groups. You configure the SNMPv3 groups in
"System > SNMP".
Description
The table has the following columns:
●
Group Name
Shows the group name.
●
User Name
Shows the user that is assigned to the group.

Siemens SIMATIC NET SCALANCE W700 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W700
Category	Wireless Access Point
Language	English