Siemens SIMATIC NET SCALANCE W700 User Manual

Appendix D
D.2 Messages in the WLAN Authentication Log
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
452 Configuration Manual, 08/2018, C79000-G8976-C267-13
D.2
Messages in the WLAN Authentication Log
Messages in access point mode
Alarm
Description
Client <MAC address> <system name> associated suc-
cessfully.
The client has logged in successfully on the access point.
Client <MAC address> <system name> disassociated
with reason <reason description>
The client was logged off from the access point.
VAP<Num>: Client <MAC> failed to associated; status
(<text>)
The connection of the client to the VAP has failed. The reason
is displayed as text.
VAP<Num>: Client <MAC> disassociated with reason
(<text>)
The client was successfully disconnected from the VAP. The
reason is displayed as text.
VAP<Num>: Client <MAC>deauthenticated with reason
(<text>)
The client was logged off from the AP. The reason is displayed
as text.
VAP<number> Client <MAC> failed to authenticate; sta-
tus (<status>)
The authentication of the client failed. The reason is displayed
as text.
VAP<Num>: Client <MAC> failed to disassociated; status
(<text>)
The connection of the client could not be terminated. The rea-
son is displayed as text.
VAP<Num>: Client <MAC> associated successfully The client has connected successfully to the VAP or the client
has logged on successfully to the VAP.
RADIUS: Access rejected for client <MAC>
The RADIUS server denies the client access.
RADIUS: Access accepted for client <MAC>
The RADIUS server allows the client access.
WDS Connection is established to AP <MAC> The WDS connection is successfully established to the access
point.
WDS disconnect from AP <MAC>
The WDS connection to the access point is terminated.
Messages in client mode
Alarm
Description
Associated successfully to AP <MAC address> <system
name> at channel <channel number> (frequency <fre-
quency> MHz)
The client has logged in successfully on the access point.
Disassociated from AP <MAC address> <'sys name'>
with reason (Disassociated because sending STA is leav-
ing (or has left) BSS)
The client was logged off from the access point.
Failed to authenticate to AP <MAC>; status (<Text>) The authentication of the client with the access point failed.
The reason is displayed as text.
Failed to disassociate from AP <MAC>; status (<Text>) The connection of the client to the access point could not be
terminated. The reason is displayed as text.
Failed to associate to AP <MAC>; status (<Text>) The connection of the client to the access point has failed. The
reason is displayed as text.

Siemens SIMATIC NET SCALANCE W700 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W700
Category	Wireless Access Point
Language	English