Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
211
Configuration
Selecting system events
On this page, you specify how a device reacts to system events. To enable or disable the
options, click the relevant check boxes of the columns.
With Table 1, you can enable or disable all check boxes of a column of Table 2 at once.
Table 1 has the following columns:
●
Shows that the settings are valid for all events of table 2.
●
E-mail / Trap / Log Table / Syslog / Faults
Enable or disable the required type of notification for all events. If "No Change" is
selected, the entries of the corresponding column in table 2 remain unchanged.
●
If you click the button, the setting is adopted for all events of table 2.
To Next Page
Loading...
Need help?
General
