EasyManuals Logo

Siemens SIMATIC NET SCALANCE W700 User Manual

Siemens SIMATIC NET SCALANCE W700
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background imageLoading...
Page #198 background image
Configuring with Web Based Management
6.5 "System" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
198 Configuration Manual, 08/2018, C79000-G8976-C267-13
Table 6- 2 TFTP/SFTP
File type
Description
Save
Down-
load
Config This file contains the start configuration.
Among other things, this file contains the definitions of
the users, roles, groups and function rights. The
passwords are stored in the "Users" file.
X X
ConfigPack Detailed configuration information. for example, start
configuration, users, certificates, firmware of the de-
vice (if saved as well).
For more detailed information on creating and using
the ConfigPack incl. firmware, refer to the section
"Maintenance (Page 421)".
X X
CountryList The zip file contains the country list as a csv and as a
pdf file.
X --
Debug This file contains information for Siemens Support. It
is encrypted and can be sent by e-mail to Siemens
Support without any security risk.
X --
EDS Electronic Data Sheet (EDS)
Electronic data sheets for describing devices in the
EtherNet/IP mode
X --
Firmware The firmware is signed and encrypted. This ensures
that only firmware created by Siemens can be down-
loaded to the device.
X X
GSDML
Information on the device properties (PROFINET)
X
--
HTTPS Cert Preset HTTPS certificates including key
The preset and automatically created HTTPS certifi-
cates are self-signed.
We strongly recommend that you create your own
HTTPS certificates and make them available. We
recommend that you use HTTPS certificates signed
either by a reliable external or by an internal certifica-
tion authority. The HTTPS certificate checks the iden-
tity of the device and controls the encrypted data
exchange.
There are files to which access is password-
protected. To successfully load the file into the device,
enter the password specified for the file on the WBM
page "Passwords (Page 361)".
Maximum file size: 8192 bits
X X
LogFile
File with entries from the event log table
X
--
MIB
Private MSPS MIB file "Scalance_w_msps.mib"
X
--
RunningCLI Text file with CLI commands
This file contains an overview of the current configura-
tion in the form of CLI commands. Passwords are
masked in this file as follows: [PASSWORD]
You can download the text file. The file is not intended
to be uploaded again unchanged.
X --

Table of Contents

Other manuals for Siemens SIMATIC NET SCALANCE W700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC NET SCALANCE W700 and is the answer not in the manual?

Siemens SIMATIC NET SCALANCE W700 Specifications

General IconGeneral
BrandSiemens
ModelSIMATIC NET SCALANCE W700
CategoryWireless Access Point
LanguageEnglish

Related product manuals