Configuring with Web Based Management
6.6 "Interfaces" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
326 Configuration Manual, 08/2018, C79000-G8976-C267-13
10.On the "Remote Interfaces" tab, the host and the interfaces on which the function
"Remote Capture" was previously enabled are displayed.
11.Select the interface and click the "OK" button.
12.To start the recording click "Start". You can obtain further information about handling the
program in Wireshark.
If you analyze several interfaces you can use a Wireshark instance for each interface.
To Next Page
Loading...
Need help?
General
