Siemens SIMATIC NET SCALANCE W700 User Manual

Configuring with Web Based Management
6.9 "Security" menu
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
403
Description
The page contains the following boxes:
●
Port
Select the required port from the drop-down list.
●
IP Address
Enter the IP address of the devices accessible to the client.
The table has the following columns:
●
Select
Select the check box in the row to be deleted
●
Radio
Specifies the WLAN interface to which the settings relate
●
Port
Specifies the VAP interface to which the settings relate
●
IP Address
The IP Address of the devices accessible to the client. If necessary, you can change the
IP address.
●
Resolver IP Address
The IP address with which the allowed IP address is resolved. The entry is necessary
when the management IP address is located in a different subnet.
If the IP address "0.0.0.0" is configured for "Resolver IP Address", the management IP
address is used for resolution.
Procedure
Creating an entry
1. Select a port from the "Port" drop-down list.
2. In the "IP Address" box, enter the IP address accessible for the client.
3. Click the "Create" button. A new entry is created in the table.
Deleting an entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.

Siemens SIMATIC NET SCALANCE W700 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE W700
Category	Wireless Access Point
Language	English