Symbol Meaning
SIMATIC BATCH is running (Running) on the BATCH master or BATCH single-station system. The
BATCH project is loaded, started and BATCH Runtime has started.
SIMATIC BATCH is running (Listening) on the BATCH standby. The BATCH project is loaded,
started and BATCH Runtime has started.
Intermediate state. Preparing to transition to the "Listening" state (Listening Prepared).
Intermediate state, switching to BATCH master (Switch up). Status change from Listening to Run‐
ning.
Intermediate state, switching to BATCH standby Switch down. Status change from Running to
Listening.
Error in SIMATIC BATCH (Fault).
Note
Combined states with Processing, Switch up, Running Prepared, Switch down, Listening
Prepared are temporary, for example, during a redundancy switchover of the BATCH server.
8.18.5.2 Status display at order folder
In addition to the symbol for the batch order folder, a symbol shows the combined status of all
batches contained in the order folder. Extended batch information is shown dynamically
overlaying this symbol.
Possible displays
Symbol Combined batch status
"Inactive" status
The batches contained in the folder have one of the following
statuses:
● Planned
● Completed
● Held
● Aborted
● Released
● Canceled
● Unknown
"Active" status
At least one batch of the order has the "Waiting" or "Running"
status.
"Held" status
At least one batch of the order has the "Holding/Pausing" or
"Held/Paused" status. All other batches are inactive or Com‐
pleted/Aborted/Stopped.
"Unknown" status
The symbol indicates that a time period is required to deter‐
mine the status information of all order folders. This is a tran‐
sitional status which results in one of the three statuses
above.
Diagnostics in PCS 7
8.18 Diagnostic tools
Service Support and Diagnostics (V8.2)
Service Manual, 03/2016, A5E36200111-AA 127
To Next Page
Loading...
