Additional information
You can find additional information on configuring message priorities in the configuration
manual
Process Control System PCS 7; Operator Station.
6.5.7 Influencing messages
Options
The following options are available to influence messages in PCS 7:
● Message suppression
– You can suppress individual block messages by configuration in the CFC.
– In process mode, you can suppress individual messages directly in the faceplate using
the "Suppress messages" check box.
● Locking and unlocking messages for blocks and OS areas
Locking (and unlocking) messages for blocks and OS areas is used when the plant operator
wants to lock all messages of an message-capable block or OS area.
● Hiding and showing messages
You hide individual messages to reduce the number of messages displayed in process
mode. The messages are entered in the message archive. The following variants are used
to hide and unhide messages in PCS 7:
– Manual hiding and displaying of messages in process mode
– Automatic hiding and displaying of messages in process mode
Additional information
● Configuration manual
Process Control System PCS 7; Operator Station
● Configuration manual
Process Control System PCS 7; Engineering System
● Manual
Process Control System PCS 7; OS Process Control
Message concept of PCS 7
6.5 Understanding messages
Service Support and Diagnostics (V8.2)
78 Service Manual, 03/2016, A5E36200111-AA
To Next Page
Loading...
Need help?
General
