CPU 416-2
416-2XK02-0AB0
7
V3.0.2
X
98
● When a firmware update is delivered you obtain a label showing the current firmware
version which you can paste over the displayed label. After having completed the firmware
update, replace the module label accordingly to identify the valid FW version. This will
ensure uniformity in the plant documentation.
Modules that cannot be updated:
● If only the manufacturer can perform changes to a module, only the product version is
shown on the housing of the module (indicated by a cross; in the following example: product
version 10).
Example:
PS 407 10A
407-0KA01-0AA0
X
11
12 13
Recommendation for performing firmware updates
Perform these firmware updates at regular intervals when an opportunity presents itself (such
as during a scheduled plant shutdown).
Supply sources for the latest firmware version
You can request the update files for the latest firmware versions from your Siemens contact
partner, or download these from the Internet (http://support.industry.siemens.com/cs/
products?dtp=Download). If you cannot access the Internet address, contact
Technical Support.
Note
The update file may be supplied in an executable, self-extracting file (.exe). When you want
to perform consecutive updates for different module types of module versions, you must unzip
the update files in separate folders for the different CPUs as follows:
● Type of module
● Product version
● Firmware version
Ensuring Availability
3.3 Hardware update
Service Support and Diagnostics (V8.2)
34 Service Manual, 03/2016, A5E36200111-AA
To Next Page
Loading...
Need help?
General
