Siemens SIMATIC PCS 7 - Exporting Configuration and Parameter Assignment Data

representation file supplied with SIMATIC PDM in the export dialog.
Default setting: <path>\<name>.<file format>
● Path: Programme\Siemens\Automation\SIMATIC_PDM\Templates
● Name: PDM<Version>_ExportTransformation
● File format: xsl
Additional information
● Section "Exporting (Page 155)"
● Section "Importing (Page 158)"
7.5.2 Exporting configuration and parameter assignment data
You can run the "Export" function for the following objects:
● Devices
● Modular devices (e.g., remote I/O stations)
● Networks with subordinate devices
Export environment
You can export object data in the following environments:
● From SIMATIC PDM
● In the process device network view in SIMATIC Manager
● In the process device plant view in SIMATIC Manager
● In HW Config
Procedure
1. Select a PDM object and choose the associated menu command:
– The menu command File > Export... in SIMATIC PDM.
– The shortcut menu command SIMATIC PDM > Export... in SIMATIC Manager, in the
process device network view or process device plant view.
– The shortcut menu command SIMATIC PDM > Export... in HW Config.
2. Make the settings for exporting the device data:
You can find additional information on this in the section ""Export - <Object name>" dialog
box (Page 156)".
3. Click "Start".
Functions
7.5 Export / Import
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA 119