6.3.4 Toolbar
The toolbar is located below the menu bar and contains a number of icons with which you can
quickly perform frequently used menu commands without having to open a menu and select
the command.
SIMATIC PDM mode Icons
Parameter assignment mode
Icons
The icons are linked to the following commands:
Parameter assignment mode Menu command
Save (Page 155)
Print (Page 161)
Download to device (Page 200)
Upload to PG/PC (Page 201)
Value comparison (Page 168)
Change log (Page 184)
Process variables / Measured value display (depends on device)
(Page 188)
Update diagnostics (Page 191)
Start LifeList (Page 127)
Find (Page 194)
Contents (Page 193)
6.3.5 Structure view
The left-hand section of the main window in the structure view contains a tree structure. The
objects displayed depend on the object which was selected before SIMATIC PDM was started.
● If a single field device was selected, it will be displayed in the structure view. You can find
information on this in the section "Stand-alone device view (Page 65)".
● If a network or gateway (e.g., DP/PA-Link) was selected, the tree structure is displayed with
the associated devices in the structure view. You can find information on this in the section
"Multiple devices view (Page 66)".
Views
6.3 Views in SIMATIC PDM
Help for SIMATIC PDM (V8.2)
60 Operating Manual, 02/2014, A5E33203676-AA
To Next Page
Loading...
