Siemens SIMATIC PCS 7 - Compact PROFIBUS Device (Sensors and Actuators)

● Operating instructions titled SIMATIC NET; IE/WSN PA Link
● Operating instructions titled SIMATIC NET; IE/WSN PA Link (Compact)
7.3.1.9 Compact PROFIBUS device (sensors and actuators)
Procedure
To integrate a PROFIBUS device (PROFIBUS DP device, PROFIBUS PA device or
PROFIBUS remote I/O), proceed as follows:
352),%86'3
352),%863$352),%86'3
352),%86'3352),%863$
352),%86'3
(WKHUQHW
Creating a network
1. Open the process device network view in SIMATIC Manager.
2. Select the "Networks" folder in the tree structure in the left window and select the Insert
New Object > Object command from the shortcut menu.
The "Insert Object" dialog box opens.
3. Click the "Assign Device Type" button.
Inserting a PROFIBUS device or remote I/O
Follow the steps below to insert objects into higher-level objects one after the other.
Higher-level object Object to be inserted
"Networks" folder Type of network via which the field devices are connected
to the automation system (e.g., PROFIBUS DP network).
PROFIBUS DP network PROFIBUS DP device / PROFIBUS PA device
Header module (selection: remote I/O) Modules (selection: module)
Modules (selection: module) Field device (selection: HART device)
Functions
7.3 Device management
Help for SIMATIC PDM (V8.2)
94 Operating Manual, 02/2014, A5E33203676-AA