Function Single Point Basic Extended
Start 'Update
diagnostics'
- - +
Device Update diagnostics - - +
Assign address
and TAG
+ + +
Reassign (select
Device Type)
- + +
Properties + + +
7.7.3 Menus and dialog boxes
7.7.3.1 "File" menu
Export
Exports the determined network, including all of its devices.
The devices identified as bus master objects (e.g. PCs) are not exported.
The "Export" function is used to open the "Export - <Object name>" dialog box (Page 156).
Note
If the "Export" dialog is started from the LifeList, the "Document Manager" check box is
cleared.
A structure export file is generated during the export from the LifeList.
The parameter export files can only be generated for objects with EDD assignment.
Close
Closes the change log or LifeList.
7.7.3.2 "Edit" menu
Start "Scan"
Starts a scan operation.
The accessible devices of the network on which the LifeList was started are determined.
Any previous scan result is deleted.
Automatic EDD assignment then takes place, depending on available licenses.
Functions
7.7 LifeList
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA 133
To Next Page
Loading...
