● Device
● Revision
Note
Note on remote I/Os
With remote I/O, you search for the manufacturer and a type for the head-end station
during device selection.
Assign the required device description to the device.
Device description missing from PC
Open the Device Integration Manager and integrate the missing device descriptions.
See also
Integrating device descriptions (Page 40)
9.1.3.8 Show change log
The change log records which actions have been performed with SIMATIC PDM on objects
of the plant.
Properties
● The change log is part of the associated SIMATIC project.
● The change log is a circular log (first in, first out).
● Some boxes of the change log are created automatically. Information is entered in the
language preset in the SIMATIC project.
Requirements for using the "Change Log" function
You need the "SIMATIC PDM Extended" license key to use the "Change log" function.
Entries in the change log
The "SIMATIC PDM Change Log" dialog window displays actions which have been performed
in the project or on individual objects (devices). The displayed actions depend on the object
displayed in SIMATIC PDM.
You can limit the displayed information by setting the filter. The "Action" drop-down list box of
the filter shows which actions can be displayed.
Menus and dialog boxes for SIMATIC PDM in the SIMATIC Manager
9.1 "Edit" menu
Help for SIMATIC PDM (V8.2)
204 Operating Manual, 02/2014, A5E33203676-AA
To Next Page
Loading...
Need help?
General
