Setting the printer options
Note
Note the following:
● The printer options depend on your computer's operating system and on the printer being
used.
● The file is sent to the default printer.
● If the printout has more than one page, two periods are printed after the page number in
the bottom right corner of the page. The last page does not have these periods, indicating
no more pages are to follow.
Requirements
● SIMATIC PDM is open.
● In the structure view, an object is selected in the root folder of a device.
You can find information on the structure view in the section "Structure view (Page 60)".
Procedure
1. Select the menu command File > Print or click the "Print" button .
The "Print" dialog box opens.
2. Select the required options.
3. Click "OK".
8.1.5 Exit
This command closes the "SIMATIC PDM" program.
If changes have been made in the current session, a prompt appears giving you the option of
saving the file before closing the program.
8.1.5.1 "Save changes?" dialog box
This dialog box indicates that changes have been made, which have yet to be saved.
● Click "Yes" if you want to save the changes.
● Click "No" if you want to discard the changes.
● Click "Cancel" if you do not want to exit SIMATIC PDM yet.
Menus and dialog boxes in SIMATIC PDM
8.1 "File" menu
Help for SIMATIC PDM (V8.2)
162 Operating Manual, 02/2014, A5E33203676-AA
To Next Page
Loading...
Need help?
General
