currently being processed. Errors and other messages are saved and can be displayed at a
later time.
Suppressing message dialogs
You can suppress message dialogs during the loading. Select the "Execute 'Load' without info
dialogs" check box. You can find additional information using the Options > SIMATIC PDM >
Settings > The "Load" tab (Page 213) menu command.
Additional information
You can find information on loading FF devices in the
PCS 7 FOUNDATION Fieldbus
commissioning manual
See also
"Download to Device - <...>" dialog box (Page 164)
9.1.3.4 Upload to PG/PC
This menu command reads the parameters of the device and displays them in the parameter
table.
If you are not yet online, SIMATIC PDM makes an online connection at this time.
If a device is opened twice, for example, by opening the higher-level network and by opening
it directly, this menu command is grayed out in the second window and can only be accessed
in the window that was opened first.
Note
Before uploading to PG/PC from remote I/Os, you need to add a corresponding number of
empty modules below the head module in the configuration.
Errors and messages
During the loading, all errors and messages are shown immediately. Any errors occurring in
a device do not cause the entire action to be aborted; they only apply to the device that is
currently being processed. Errors and other messages are saved and can be displayed at a
later time.
Suppressing message dialogs
You can suppress message dialogs during the loading. Select the "Execute 'Load' without info
dialogs" check box. You can find additional information using the Options > SIMATIC PDM >
Settings > The "Load" tab (Page 213) menu command.
Menus and dialog boxes for SIMATIC PDM in the SIMATIC Manager
9.1 "Edit" menu
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA 201
To Next Page
Loading...
Need help?
General
