● "Save" menu command
● Online access to the device: Allows communication with the device
Predefined roles
The predefined roles "PDM CI" and "Service user" are created for SIMATIC PDM. The
predefined roles can neither be changed nor deleted.
Role: PDM CI
The "PDM command interface" role controls access of an application to the PDM command
interface. The application also reports the administered Windows user.
After a successful password check and check of role membership, the application is allowed
program-controlled access to PDM via the command interface.
Role: Service user
The role "Service user" allows access to the following menu commands and functions:
● "Parameter View" menu command
● "Device" menu command
● "View" menu command
● "Diagnostics" menu command
● "Service" menu command
● "Write to device" menu command
● "Read from device" menu command
● "Save" menu command
● Online access to the device: Allows communication with the device
● Access to PDM Web
9.4.3 HART server
Opens the HART server application.
You can use SIMATIC PDM to configure HART devices for the following networks:
● Multiplexer networks
– Multiplexer network with panel (for example, MTL multiplexer)
– Multiplexer network without panel (for example, P+F multiplexer)
● Wireless HART gateway
– You configure a wireless HART gateway as a HART multiplexer.
Menus and dialog boxes for SIMATIC PDM in the SIMATIC Manager
9.4 "Options" menu
Help for SIMATIC PDM (V8.2)
218 Operating Manual, 02/2014, A5E33203676-AA
To Next Page
Loading...
