Settings in the setup
Below you will find information on the settings made in the setup dialog boxes, listed in the
order in which they are processed:
1. Setup language
– For example, click "English" and "Next".
2. Welcome
– "Next"
3. Product information
– Read this if needed and "Next"
4. License agreement
– Activate the check box "I accept the conditions of the licensing agreement as well as
the conditions of the Open Source Licensing Agreement".
– "Next"
5. Setup type
– Activate the "Install" check box and "Next".
6. User information
– Enter the user information and click "Next".
7. Installation type
– Package installation
– Custom installation
– You can specify the target folder for SIMATIC PDM.
– "Next"
8. Programs
– The software installed on the PC for this selection is listed in the display window. "Next"
Note
FOUNDATION Fieldbus
If you wish to configure or monitor devices on FOUNDATION Fieldbus, you must select
the "FOUNDATION Fieldbus" option.
Installation
3.2 Installing SIMATIC PDM
Help for SIMATIC PDM (V8.2)
Operating Manual, 02/2014, A5E33203676-AA 25
To Next Page
Loading...
Need help?
General
