Siemens SIMATIC S7-300 Module data Function Manual

03/2013 1 Introduction
1.3 Operating Concept
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
1-17
Function Description Type
• No status
• …
• …
• …
• Select all
All customers documented in the master data are
available for filter selection.
SELECTION
(toggle)
DISPLAY
All machines All machines in the list can be selected or cleared at
the same time.
All machines selected here can be selected as a
group.
SELECTION
(toggle)
DISPLAY
• Partner for external
machines
• Partner for own
machines
As a subgroup of All machines, you can choose
between Released by me or Released for me.
SELECTION
(toggle)
DISPLAY
Filtering Updates the current display to these filter conditions
based upon the entries and selections you have
made.
ACTION
Select group All machines with a check mark set for all machines
or manually for individual machines in the list can
be defined as a group.
This group will be used in all menus for views and
functions with multiple machines.
ACTION


Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)