Siemens SIMATIC S7 EIP-200S - Page 49

EIP-200S Ethernet/IP Adapter
2.7 Device profile: vendor-specific objects
EIP-200S Ethernet/IP Adapter Distributed I/O System
System Manual, 06/2018, A5E44345053-AB
49
Attribute
ID
Access rule
Name
Data type
Data value
51
Get / Set
1,2
ParamByte30
USINT
52 Get / Set
1,2
ParamByte31 USINT
53
Get / Set
1,2
ParamByte32
USINT
1
When Adapter Object AutoConfig attribute is true: These attributes reflect the nonvolatile configu-
ration parameters and are not used by the Adapter.
2
When an I/O connection is open, setting this attribute returns Device_State_Conflict.
Attribute 5 [SlotStatus] details
The SlotStatus attribute, listed in the table below, reports the operating status of the module
installed:
Status code
Text
Description
0
OK
Module is operating normally.
1
Module error
2
Wrong module
3
No module
Slot is empty - no module installed.
4 - 255
Reserved