Siemens SIMATIC S7 EIP-200S User Manual

EIP-200S Ethernet/IP Adapter
2.7 Device profile: vendor-specific objects
EIP-200S Ethernet/IP Adapter Distributed I/O System
50 System Manual, 06/2018, A5E44345053-AB
Attribute 6-13 [Channel<n>Status] details
The Channel<n>Status attributes, listed in the following table, report the operating status of
each channel in the module:
Status code
Text
1
Short circuit
2 Under voltage
3
Over voltage
4 Overload
5
Excess temperature
6
Wire break
7
Over range
8
Under range
9
Internal module error
16
Parameter assignment error
17
Sensor or load voltage missing
18
Fuse defect
19
Communication error
20
Ground error
21
Reference channel error
22
Process interrupt lost
23
Actuator warning
24
Actuator shutoff
25
Fail-safe shutoff
26
External error
27 Ambiguous error
28
Channel temporarily unavailable

Siemens SIMATIC S7 EIP-200S Specifications

General

Brand	Siemens
Model	SIMATIC S7 EIP-200S
Category	I/O Systems
Language	English