Siemens SIMOCODE pro V MR

An overview of system components
SIMOCODE pro
78 System Manual, 05/2019, A5E40507475002A/RS-AD/004
System component,
accessory
MLFB
Diagram
for
pro C
for
pro S
for V
PN GP
for pro
V PB
for
pro V MB
RTU
for
pro V
PN
for
pro V
EIP
Labeling strips
for pushbuttons of the
operator panel 3UF7 20
for pushbuttons of the
operator panel with
display 3UF7 21
for LEDs of the
operator panel 3UF7 20
3UF7925-0AA00-0
3UF7925-0AA01-0
3UF7925-0AA02-0
✓ ✓ ✓ ✓ ✓ ✓ ✓
Push-in lugs for screw
mounting
e.g. on mounting plate;
2 units required per
device
Can be used for the
current measuring
modules and
current/voltage
measuring modules
3UF7 1.0, 3UF7 1.1
and 3UF7 1.2
3RV2928-0B ✓ ✓ ✓ — ✓ ✓ ✓
Can be
used for 3UF700,
3UF701, 3UF7 3,
3UF7 4, 3UF7 5 and
3UF7 7
3RP19 03 ✓ — — ✓ ✓ ✓ ✓
Can be used for
3UF7020-1A.01-0 and
3UF7600-1A.01-0
3ZY1311-0AA00 — ✓ ✓ — — — —
Terminal covers
Covers for cable lug
and busbar
connections:
Length 100 mm, can be
used for
3UF7 1.3-1BA00-0
Length 120 mm, can be
used for
3UF7 1.4-1BA00-0
3RT1956-4EA1
3RT1966-4EA1
✓ ✓ ✓ ✓ ✓ ✓ ✓
Covers for box
terminals:
Length 25 mm, can be
used for
3UF7 1.3-1BA00-0
Length 30 mm, can be
used for
3UF7 1.4-1BA00-0
3RT1956-4EA2
3RT1966-4EA2
✓ ✓ ✓ ✓ ✓ ✓ ✓