Converter with control units CU250D-2
Operating Instructions, 04/2014, FW V4.7, A5E34261542B AA
21
About this manual
Who requires the operating instructions and what for?
These operating instructions primarily address fitters, commissioning engineers and machine
operators. The operating instructions describe the devices and device components and
enable the target groups being addressed to install, connect-up, set, and commission the
converters safely and in the correct manner.
What is described in the operating instructions?
These operating instructions provide a summary of all of the information required to operate
the converter under normal, safe conditions.
The information provided in the operating instructions has been compiled in such a way that
it is sufficient for all standard applications and enables drives to be commissioned as
efficiently as possible. Where it appears useful, additional information for entry level
personnel has been added.
The operating instructions also contain information about special applications. Since it is
assumed that readers already have a sound technical knowledge of how to configure and
parameterize these applications, the relevant information is summarized accordingly. This
relates, e.g. to operation with fieldbus systems and safety-related applications.
What is the meaning of the symbols in the manual?
An operating instruction starts here.
This concludes the operating instru
ction.
The subsequent text is applicable for an operator panel.
e following text applies if you are using a PC with STARTER.
es of the inverter-function symbols
The description of the corresponding inverter function starts with one
of these symbols.
Overview of the converter functions (Page 111).
To Next Page
Loading...
