Appendix
A.6 Application Examples
Converter with control units CU250D-2
Operating Instructions, 04/2014, FW V4.7, A5E34261542B AA
359
Call the STARTER and go online
Procedure
To call STARTER from STEP 7 and establish an online connection to the inverter, proceed
as follows:
1. Highlight the inverter in the SIMATIC manager with the right mouse button.
2. Open the STARTER via "Open object".
3. Configure the inverter in STARTER and click on the Online button (
).
4. In the following window, select the inverter and then the S7ONLINE as access point.
5. Exit the screen form with OK.
You have called STARTER from STEP 7, and have established the online connection to the
inverter.
Connecting the safety-related input
The following examples show the interconnection of the safety-related input accordance with
PL d to EN 13849-1 and SIL2 according to IEC61508. You can find further examples and
information in the Safety Integrated Function Manual.
To Next Page
Loading...
