Siemens SINAMICS G120D - Supported Motor Series

Description
3.3 Supported motor series
Converter with control units CU250D-2
Operating Instructions, 04/2014, FW V4.7, A5E34261542B AA
27
3.3
Supported motor series
The inverter is designed for the following motor series:
SIMOTICS GP, SIMOTICS SD IEC motors
SIMOTICS M main motors
1LG6, 1LA7, 1LA9 and 1LE1 standard induction
motors
Multi-motor drive is permissible, i.e. multiple
motors operated on one inverter. See also: Multi-
motor drive
(http://support.automation.siemens.com/WW/view/
en/84049346).
1PH8 induction motors
On request: Encoderless permanently excited
synchronous motors SIMOTICS S
Motors from other manufacturers
1FK7 synchronous motors
Standard induction motors