Siemens SINAMICS G120D - Application-Specific Functions; Functions that Match the Application

Setting functions
8.8 Application-specific functions
Converter with control units CU250D-2
218 Operating Instructions, 04/2014, FW V4.7, A5E34261542B AA
8.8
Application-specific functions
8.8.1
Functions that match the application
The inverter offers a series of functions that you can use depending on your particular
application:
● Unit changeover (Page 219)
● Braking functions
– Electrically braking the motor (Page 224)
– Motor holding brake (Page 228)
● Automatic restart
Details can be found in the List Manual from parameter p1210, see also: Manuals for
your inverter (Page 371).
● Flying restart (ON command with rotating motor)
Details can be found in the List Manual from parameter p1200, see also: Manuals for
your inverter (Page 371).
● Monitoring functions, e.g. Monitoring the load torque (system protection) (Page 232)