Setting functions
8.7 Protection and monitoring functions
Converter with control units CU250D-2
216 Operating Instructions, 04/2014, FW V4.7, A5E34261542B AA
p0622
Motor excitation time for Rs_ident on switching on again
The converter sets the parameter value to the corresponding result of the motor data
p0625
Motor ambient temperature during commissioning
(factory setting: 20 °C)
Motor ambient temperature given in °C at the time of motor data identification.
More information on temperature calculation can be found in function plans 8016 and 8017
and the list manual.
To Next Page
Loading...
