Commissioning
5.3 Procedure for commissioning via STARTER
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
145
Figure 5-26 Entering the encoder data (option K50)
32. In the Name field, enter a name of your choice.
33. Click the Select standard encoder from list radio button and select one of the available
encoders.
● Standard encoders with code numbers 1xxx can be selected when encoder module
SMC10 is fitted (option K46).
● Standard encoders with code numbers 2xxx can be selected when encoder module
SMC20 is fitted (option K48).
● Standard encoders with code numbers 3xxx can be selected when encoder module
SMC30 is fitted (option K50).
To Next Page
Loading...
